Get matched with top concrete leveling pros in Clarks, LA

A layer of exposed aggregate concrete should be 1 to 2 inches thick if you’re installing it on top of existing concrete. If you’re pouring a new slab with the finish, slab thickness will depend on the application. Exposed aggregate concrete driveways should be 4 to 6 inches thick in most cases or 8 to 12 inches for commercial vehicles. Sidewalks, patios, and walkways should be 4 inches thick.

No, hairline cracks in concrete are generally not a problem as they do not impact the strength and longevity of the concrete. Generally, cracks less than 0.3 millimeter wide don’t impact the structure. Hairline cracks can grow over time and weaken the structure, such as in a home foundation. Some hairline cracks can also cause leaks in a foundation. It’s important to watch the cracks to see if they grow. Contact a concrete contractor if you notice cracks exceeding 0.3 millimeter wide.

Driveway aprons typically range between four and seven inches thick, though your town's building codes will likely have specific requirements. Additionally, you may need to add a layer of permeable aggregate in the excavation below your paved apron to ensure proper stormwater drainage.

Pervious concrete should be between 4 and 8 inches thick to drain water properly. Surfaces like parking lots and driveways should be at least 6 inches thick to accommodate the weight of vehicles, while patios and walkways may be poured between 4 and 6 inches thick. There’s no standard for pervious concrete thickness, but in most cases, the more weight the surface will need to hold, the thicker it should be.