Top-rated plumbers.

Get matched with top plumbers in Bunkie, LA

Enter your zip and get matched with up to 5 pros

Need a pro for your plumbing project in Bunkie, LA?

Select your specific project to find the pro for you.

Find Plumbers in Bunkie

Avatar for FlowPro Plumbing LLC
FlowPro Plumbing LLC
4.5(
15
)
Faucets, Fixtures and Pipes - Repair or ReplaceWater Heater - Repair or ServiceWater Heater - Install or Replace+4 more

Serving Bunkie, LA and surrounding areas

Approved

In business since 2019

Free estimates

Credit card accepted

"Cody with FlowPro Plumbing did an excellent job in replacing two toilets in our home in Sunset, La. He removed the old toilets and took them away without leaving a mess. While here he also cleared a water line to the bathtub that was clogged with rust. Cody and his helper were very professional, and I would not hesitate to recommend his services."
Finished bathroom
Demo work
17 neighbors recently requested a quote
Recommended by78%of homeowners
Avatar for Neli Virtual Appliance Repair
Neli Virtual Appliance Repair
4.2(
665
)
Refrigeration System - Install or ReplaceRefrigeration System - Install or Replace - For BusinessRefrigeration System - Repair or Service+1 more

Serving Bunkie, LA and surrounding areas

Approved

In business since 2016

Free estimates

Warranties offered

"I hired Neli over a week period for 3 different appliances, my dryer, washing machine, dishwasher, and even kitchen sink! I had a fantastic experience: 1. I fixed my dryer with Thomas' excellent remote guidance, changing the timer and the switch! Fabulous guidance Thomas, with lots of money saved! I learned a lot in the process. 2. I determined that there was no dishwasher leak and in the process learned how to check for leaks and trouble shoot for some common repair issues. It cost $40.00 but as I had some water on the floor, I was ready to get a new dishwasher. Now, I am confident that it wasn't a leak and caused by putting in the dishes in a funny manner and not a repair issue. I am using the dishwasher now again with no problem. 3. I determined with Thomas' help that the washing machine had a major problem and could have spun out of control into my wall....no question, it was time to get a new washing machine! This was a well spent $40.00--I even got Thomas advice on purchasing a new washing machine and what to look for. 4. I checked the drainage on my kitchen sink and learned how to empty out the "trap" and that most likely, I am okay, but what to swap out if I have continuing issues with slow drainage. In the end, I saved lots of money, gaining and learning valuable experience! Absolutely fabulous service!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Response time1 day
Recommended by87%of homeowners
Jason Bullock
New to Angi
Drain Clog or Blockage - ClearBathtub Install or ReplaceFaucets, Fixtures and Pipes - Repair or Replace+10 more

Serving Bunkie, LA and surrounding areas

Approved

Emergency services offered

Small jobs welcome

Credit card accepted

My name's Jason, i do a lot of repairs, i can do installs as well to a limit of permits of course but I will provide as much service I can and get the job done right! I also do some mechanic work as well, Just tell me what you need installed or repaired and I'll guarantee be of help!

Water heater installation
2 neighbors recently requested a quote
...
Showing 1-10 of 65
Plumbing questions, answered by experts

You can remove air from your shower pipes in a few simple steps. Turn off the water at the main water supply and open all the faucets in your home, starting with those closest to the water supply and working away from those. Let the faucets run dry, then flush all the toilets in your home until there is no more water in them. From there, turn the water supply back on and let it flow for 10 to 15 minutes until the sputtering stops. To finish, turn off your faucets and flush your toilets in the reverse order.

Flex is necessary for soldering copper pipe. This acidic paste attracts the solder, pulling it deeper into the joint so the solder fills all the gaps between the two metal fittings. While many solder products contain small amounts of flux, you need to apply the additional flux paste to ensure you achieve a water-tight fit between the two copper pipes.

While you shouldn’t increase the flow of your low-flow toilet by adjusting the water level in the toilet bowl set by the manufacturer, you can make the flow as efficient as possible by ensuring the rim jets under the rim are unobstructed. To do this, use a mirror to look under the rim and scrub them with a toothbrush or a small wire to clear any debris stuck in the holes. You can also watch for leaks, make sure the internal components are in good shape, and replace them if necessary.

The overflow drain and wastewater drain connect to the same main pipe to take water away from your bathtub. Your overflow drain is meant to prevent damage to your bathroom—especially the floor around your bathtub, where excess water can quickly create a mold or mildew problem.

The average lifespan of plumbing ranges from 20 to 100 years, primarily determined by the pipe material. For example, PEX piping can last 80 to 100 years, while copper and cast iron pipes have a lifespan of 50 to 100 years. Other materials like CPVC, brass, and steel typically last between 50 and 70 years, and galvanized steel pipes have a shorter lifespan of up to 50 years. The longevity of any pipe material is also affected by factors like soil acidity, extreme temperatures, and proper maintenance, which is crucial for ensuring a long service life.

The Bunkie, LA homeowners’ guide to plumbing services

From average costs to expert advice, get all the answers you need to get your job done.