Get matched with top sink installation pros in Georgetown, KY

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.

Clean regularly with non-abrasive cleaners, avoid pouring grease down the drain, and check for leaks under the sink.

For safety when installing a vanity, attaching the vanity to the wall is ideal to prevent it from moving. Typically, sinks must be 4 inches away from bathtubs. Also, most states require that you have 21 inches in front of a sink, but the National Kitchen and Bath Association (NKBA) recommends 30 inches for more comfort.

Yes, you can install a farmhouse sink on an existing countertop—but there are some caveats. You’ll need to precisely measure. It’s best to choose a sink that’s the same dimensions as your existing sink, since your contractor won’t have to cut the countertop. Otherwise, pay close attention to the depth of your counter (the front to back measurement). You don’t want to install something that’s so big it sticks out beyond your countertop and cabinetry.