Get matched with top electricians in Sedgwick, KS

Aluminum wiring can pose a significant fire risk because it tends to expand, contract, and overheat, leading to failing connections and splices. If your home has aluminum wiring, it doesn't always require a complete replacement, but you must take safety precautions. The first step is to hire a licensed electrician to conduct a thorough inspection. Based on their findings, you have several options:

• Full Replacement: The safest but most expensive solution is to replace all aluminum wiring with copper.

• Copper Pigtailing: A more budget-friendly option, suitable for certain homes, involves adding a short section of copper wire to the end of each aluminum wire at connection points.

• Other Safety Upgrades: Your electrician may also recommend installing aluminum-compatible outlets and applying an anti-oxidant paste to connections to prevent corrosion.

Consulting a professional will help you determine the best course of action to ensure your home's wiring meets current safety standards.

A GFCI outlet is easy to identify. It features two buttons on the face that read “TEST” and “RESET.” Sometimes, the “RESET” button is red. These are positioned in the center of the two three-prong plug-in slots you see on a regular outlet. Some also feature a green light to indicate when the outlet is working, changing to red when there is a problem.

Unless you’re a licensed electrician with extensive experience in upgrading electric panels, you must hire a professional for any electrical work. A licensed electrician will make sure your breaker is upgraded safely and in compliance with local codes. Your pro will also take care of any permits and inspections that are needed.

If only half of your outlet works, there are usually two possible causes: faulty wiring or a half-hot outlet. The first thing you'll want to do is check the circuit breaker panel to ensure that it's not tripped. If your circuit breaker isn't tripped, turn off the electricity and inspect the wiring to see if anything has come loose or corroded. 

If you have a half-hot outlet, it means half of the outlet is controlled by a switch somewhere on the same circuit, which should be nearby. This is an intentional electrical design commonly found in rooms without overhead lights.