Get matched with top sump pump installation pros in Cheney, KS

If your sump pump isn’t engaging, it might be clogged with dirt and debris. Check to see if the fitting lid is loose and has been letting debris in. Next, check the float and make sure it’s not obstructed by rust or gunk, which results from insufficient maintenance. Tangled wires or damaged switching systems can also stop your sump pump from engaging.

A sewage ejector pump is necessary if you have any plumbing fixtures, such as a bathroom, laundry room, or sink, located below the level of your home's main sewer line. Standard plumbing relies on gravity to drain wastewater and solid waste into the municipal sewer system or a septic tank. For fixtures below this level, like those in a basement, gravity cannot move the waste upward. The ejector pump provides the force needed to pump the sewage up to the main line. Without one, wastewater from below-ground fixtures would back up, potentially causing a sewage overflow and flooding. If all of your plumbing is on the main floor or higher, gravity is sufficient and an ejector pump is not needed.

To test for toilet leaks, use water coloring in the water tank and see if the water slips into the bowl from the tank. This test will indicate if there’s a problem with the flapper or refill tube. You can also put water coloring in the bowl of the toilet to see if there is a leak there. If there is, you should see the colored water on the outside of the toilet bowl or on the floor. 

The difference between an ejector pump and a sump pump lies in their purpose and design—an ejector pump functions to remove liquid gray water and soft solid sewage waste from your home. If you have a laundry room or bathroom in your basement, an ejector pump for your sewage tank prevents sewage from backing up in your washing machine or bathroom’s drains.

A sump pump is designed to remove excess groundwater that may enter your home, either due to flooding or periods of heavy rain.