Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Palmyra, IN

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Palmyra, IN?

Select your specific project to find the pro for you.

TRUSTED BY PALMYRA, IN HOMEOWNERS

  • Average homeowner rating star icon4.5
    Average homeowner rating
  • Verified reviews icon36
    Verified drywall insulation services reviews

Find Drywall insulation pros in Palmyra

Energy Savers, LLC
4.5(
207
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Palmyra, IN and surrounding areas

Approved (Corporate)

In business since 2000

Free estimates

Small jobs welcome

"Good crew showed up on the day specified and worked very hard all day. I am glad I hired this out instead of doing it myself. They did much more than I would have done. The foamed filled the attic floor penetrations, opened the overhang soffits for proper airflow and built barriers between insulated and non-insulated areas. Spray foamed and roll insulated the vaulted ceiling gables. Happy with the work and the price. Their price for the insulation was cheaper than I could buy it."
1750146
1750147
1750153
1750148
1750149

+19

Response time1 day
Response rate95%
74 neighbors recently requested a quote
Avatar for OPC Pest Services - Southern Indiana
OPC Pest Services - Southern Indiana
5.0(
1
)
Blown-In Insulation - Install or Upgrade

Serving Palmyra, IN and surrounding areas

Approved

In business since 1972

Free estimates

Small jobs welcome

"NOT TERMITES, but RACCOON LATRINE! The tech was GREAT; however, she checked with her regional manager and I would have to have the house rewired (some of it upstairs is tube and wire) before they could begin cleaning up the raccoon poop, etc., and then sanitize, and do insulation. p.s. Two other insulation companies, who wouldn't do the cleanup of raccoon poop, etc., would not do insulation unless the house was rewired."
Pest Control Services
Pest Control Services
Pest Control Services
Pest Control Services
Pest Control Services

+2

Response time3 days
Response rate100%
4 neighbors recently requested a quote
Avatar for USA Insulation of Indianapolis
USA Insulation of Indianapolis
4.0(
73
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Palmyra, IN and surrounding areas

In business since 2009

Free estimates

Credit card accepted

"They did a good job. They ran the vacuum after they were done, they laid down guards to make sure none of the insulation got anywhere else in my home and wore hospital booties so they didn't track anything in. They helped me take down my drapes and made sure that they had guards in the attic so the insulation wouldn't cover the ducts. I was greatly pleased with their work and I can already tell a difference in the temperature in my home."
Recommended by81%of homeowners
Avatar for Spray Foam CM
Spray Foam CM
5.0(
6
)
Blown-In Insulation - Install or Upgrade

Serving Palmyra, IN and surrounding areas

In business since 2025

Free estimates

Credit card accepted

We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers' needs. It is our mission to provide excellent workmanship, and complete customer satisfaction from start to completion of a project. In order to understand the needs, and expectations of our customers, we take great care to work, and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

Spray foam metal building
Spray foam metal building
Spray foam metal building
Spray foam metal building
Spray foam metal building

+3

Avatar for American Basement Solutions
American Basement Solutions
4.3(
46
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Palmyra, IN and surrounding areas

In business since 1992

Credit card accepted

"It was a small job. They sealed the vents to the crawlspace, then, since there was already solid insulation panels on the walls, put a vapor/moisture barrier, in the form of a tarp, 4 feet wide and as long needed, completely around the crawlspace. It was then sealed to the walls with "nails" and adhesive. This seals the wood frame of the house from the 'Outside", the ground, which is the floor of the crawlspace. A 20 mil thick, quite heavy, "floor" was installed, also in the form of a tarp, It went up the walls about 3 feet and was taped to the 'tarp" on the walls, using a tape made for this application. The piers were wrapped with the same stuff and taped to seal the inside from the outside. the "floor" is also a vapor/moisture barrier, but, heavy enough to walk on if needed. This basically makes the crawlspace another room, rather than the outside. Our house is one year old and was already getting mold on the floor joists. Since the air in the crawlspace will now be heated in the winter and cooled in the summer, just like the rest of the house, the mold and cold (52 degrees) floors we experienced last winter will hopefully be eliminated. We shall see when dumb winter gets here."
Additional Photos
Additional Photos
Additional Photos
Recommended by85%of homeowners
Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Palmyra, IN and surrounding areas

In business since 1971

Credit card accepted

"Well, the first time the replacement was ordered it was the wrong one, which of course, delayed the installation a week. When it was finally installed I had to pay an additional $850 for code upgrades. This I was not informed of by Home Shield. Then we noticed that there was water on the garage floor and found that the pipe coming in from the wall was leaking at the wall so had to call the plumbing company back out to fix it. They first tried to say it was not their fault but since there wasn't a leak before they installed they did fix it. I have used Home Shield a few times before and never had a problem. Some of the companies they use are not the best so you have to research them before you commit. I have found HS service to be good if you do your homework. At the end of the day I was without hot water for almost 3 weeks but it was do to the plumbing company they sent out."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Avatar for DWC Restoration Inc
DWC Restoration Inc
4.4(
83
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Palmyra, IN and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"Nate showed up immediately after I called with weather damage issues.  He walked me through the options and was there to discuss issues when my insurance adjuster came out.  He was amazing and professional.  Couldn't ask for a better experience and highly recommend!"
Recommended by83%of homeowners
Showing 1-10 of 25
Drywall Insulation questions, answered by experts

While a normal moisture level for drywall is between 5% and 12%, replacement is recommended if you get consistent readings above 17%. At this level, the drywall is likely too compromised by extensive moisture damage to be considered safe. You can replace either the entire sheet or just the affected section. If you are unsure after a visual inspection, it is best to have a contractor or water restoration provider use a professional moisture meter to get an accurate reading.

If you’re installing new drywall, you may need to skim coat the drywall first for a smooth finish and to allow the primer to adhere to the wall. It’s only necessary if there are imperfections in your drywall due to issues with the studs or improper drywall installation. If you’re refreshing existing walls, you may want to skim coat if there are imperfections across the wall. As an alternative, you can repair your drywall and sand it for a smooth finish before painting.

The tool you use to sand plaster will depend on the size of the project. If you’re just working on a small section of your wall to get rid of an uneven spot on the surface, hand-sanding might work. However, for larger projects, a drywall sander can make a huge difference when it comes to both time and elbow grease—and an orbital sander can help for detailed areas such as around ceiling fans.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

Yes, you can mount a TV on plaster walls—as long as you attach it to the studs. Alternatively, you can use toggle bolts, molly bolts, or another type of hardware that’s strong enough to support a TV. 

If you aren’t comfortable with this type of project, you can hire a pro. The cost of mounting a TV to a plaster wall ranges from $25 to $600 (or more), depending on the TV’s weight, size, and other factors.

The Palmyra, IN homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.