Get matched with top fencing pros in Notre Dame, IN

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

Ideally, when you replace a fence post, you should also replace the concrete footing. The concrete bonds to your new post, creating a secure base. If you install a new post into old concrete, it won’t be as sturdy.

That said, it is possible. Sometimes the post will lift right out of the concrete. If not, you can use a high-lift car jack to try and lift the pole out of the footing. Put the new post into the same hole and backfill it with fast-setting concrete. Keep in mind, this won’t work well for metal posts.

To choose where to add a fence gate, know where fence gates shouldn’t go. For example, you should avoid placing gates over low spots on the ground where water can collect and form muddy puddles. Many ranchers install gates at the corner of a fence. Certain gate placements may also be required depending on the type of gate latch you use.

A fence gate can sag for several reasons. The issue often stems from the hardware, such as damaged or bent hinges, or loose screws that can no longer support the gate's weight. The gate frame itself might also have come out of square due to failing supports. Alternatively, the problem may not be the gate but the supporting fence post, which could be leaning or out of place. In many cases, fixing a sagging gate is as simple as tightening the hinge screws or upgrading to more robust hinges.