Best drain cleaners near Middletown, IN

Once you’ve poured the baking soda and vinegar into a drain, you should wait about 10 minutes for the mixture to break down the clog. If you try the baking soda and vinegar method and it doesn't work, you can do it again or try the baking soda and salt trick.

If you want to avoid using a snake to unclog a drain, or if you don’t have one, try vinegar and baking soda. Pour 1 cup of baking soda down the drain, followed by 1 cup of white vinegar. Wait for 15 minutes, and then run hot water (but not boiling water) down the drain to see if the clog is clear. Repeat multiple times as needed.

Vinegar is better for an AC drain line because it’s less corrosive and won’t damage the pipes. It’s also a safer and easier product to use. Bleach should not be used on your AC drain line because it can corrode your pipes and harm the evaporator coil in your air conditioner.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.