Get matched with top door pros in Robbins, IL

A slab door is a standalone door without a frame or hardware. A prehung door is a complete set that includes the door, frame, hinges, and sometimes the doorknob and lockset.

In most cases, a prehung door is the better and easier option to install, especially for DIY projects or exterior applications, as they often come pre-weatherproofed. They require fewer tools and less experience to install properly. Although prehung doors are heavier and have a higher upfront cost, the investment is often worthwhile for a complete upgrade that includes a new frame.

A slab door may be a better choice if you are on a tight budget, have a custom-sized wall opening, or only need to replace the door while keeping the existing frame. While the initial cost is lower, you will need to purchase all the hardware separately and do more DIY work to hang it, which may not result in significant time or money savings.

If you don’t know which door sweep to buy, look into getting a strip or bristle sweep. They’re easy to find at the store, work well for most doors, and the simple installation is DIYable. Before buying one, measure your door width and make sure the one you want is long enough. Most door sweeps are 36 inches long, and you can cut them down to size with a hacksaw.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.