If you need to visually inspect your Christmas lights to determine which are good and which need replacement, there are a few things to look for. First, look for discoloration, such as a dark spot or two on the inside of the glass. The spot is an indication of a burnt filament. Also, look for missing filaments, cracked bulb glass, and broken sockets.

Single-pole switches are simple circuits designed for lower voltages. As such, they don’t require the complex wiring of switches that need to supply power to larger devices and appliances. This is why single-pole switches commonly go in bathrooms, closets, and other small rooms that power a low-watt light fixture. One wire creates the circuit from the power supply, the other goes to the fixture, and the final wire provides safety mechanisms through grounding.

Choosing between 12- or 14-gauge wire for your house depends on the electrical requirements of the circuit. A 12-gauge wire is thicker and can handle more power, making it better suited for devices such as kitchen appliances, air conditioning units, or electric heaters.

A 14-gauge wire is thinner and can handle less electrical current than a 12-gauge wire. It's ideal for circuits with lower power requirements, such as lighting or general-purpose outlets in bedrooms or living rooms.

Before hiring an electrician, check out the contractor’s official website, read reviews, and look them up on your local Department of Labor’s website. If you’re hiring for a complex job, pay special attention to their level of expertise. Also, call up pros directly to ask about their insurance status, specifically liability insurance, and request customer references.