Top-rated radon detection and reduction specialists.

Get matched with top radon detection and reduction specialists in Marsing, ID

Enter your zip and get matched with up to 5 pros

Need a pro for your radon detection and reduction project in Marsing, ID?

Select your specific project to find the pro for you.

Find Radon detection and reduction specialists in Marsing

Avatar for Presidential Inspections, LLC
Presidential Inspections, LLC
4.1(
51
)
Radon Gas - Testing

Serving Marsing, ID and surrounding areas

Approved

In business since 2004

Free estimates

Small jobs welcome

"Craig Burton, the person who responded to my call and conducted the air quality testing was highly professional and enlightened me about the process from start to finish. Beyond the actual samples taken indoors and outside my home to set up the differential readings needed, he took moisture & thermal readings in the area of concern. I felt confident when samples were sent off that mine would not be confused with anyone elseâ s and that the manner in which they were conducted would assure accurate testing."
Improperl Installed Insualtion
Visible Mold
Frozen Pipes
No vapor barrier in the crawl space
Worn Roof

+3

Response time8 hrs
11 neighbors recently requested a quote
Recommended by79%of homeowners
Radon Detection and Reduction questions, answered by experts

No level of radon is technically safe, but since it is naturally present everywhere, it is impossible to avoid entirely. The average radon level in homes across the United States is 1.3 picocuries per liter (pCi/L). The Environmental Protection Agency (EPA) recommends taking action to reduce radon levels if your home's test results are between 2 and 4 pCi/L or higher.

Your radon mitigation system may be loud because it’s time to replace it. Any sounds are usually from the inline fan that helps create the vacuum and resulting airflow. If you hear a new, loud mechanical or humming noise from your radon fan, it might be time to replace it. Most fans used in radon mitigation systems last up to 10 years, but may need to be replaced sooner.

If your home has a sump pit, you can integrate it with a radon mitigation system. You can accomplish this by sealing the pump cover with an airtight lid that accommodates radon vent pipes and sump pump hoses. This allows the vent pipe to redirect the radon gas outside of your home.

Testing every 2-5 years or upon adjusting occupancy or structural changes maintains safe environments.

You'll need to test your home for radon after installing the mitigation system, then again every two years. If radon remains elevated, contact a licensed radon professional, either the contractor who installed the system or a different one, and have them evaluate the system. They may need to make some changes to improve its effectiveness and performance.

The Marsing, ID homeowners’ guide to radon detection and reduction services

From average costs to expert advice, get all the answers you need to get your job done.