Get matched with top roofers in Schaller, IA

Installing solar panels involves drilling small holes in your roof to secure the solar panel mounting brackets. These brackets hold the solar panels in place and must withstand strong weather conditions so they’re secured into your roof. However, holes and screws are sealed to prevent leaking and further damage.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Yes, you should seal and cap an unused chimney to protect it from damage. Sealing the structure helps prevent moisture damage, which can lead to issues like cracks, spalling, efflorescence, and damaged mortar joints. Capping the chimney is also crucial to prevent blockages, damage from invasive critters, and downdrafts, while still allowing for proper air ventilation to manage moisture. For the best results, consult a chimney professional to select the right type of chimney or flue cap for your home. It's also wise to continue with annual chimney inspections to maintain the structure's integrity.

You can technically install a metal roof over asphalt shingles, but it isn’t a good idea. This is because you’re essentially creating a moisture barrier under the metal, which can easily—and often does—lead to significant mold damage. Removing an asphalt roof isn’t terribly expensive, and some roofing companies might cut you a serious labor and disposal discount if you add it to a new install.