Get matched with top roofers in Cherokee, IA

It’s possible to install your chimney cap in some areas, but it’s usually better to hire a professional. Before you attempt a DIY chimney cap installation, check to see if your local building department requires a permit. If it does, you should hire a professional to pull the permit and complete the work for you. Even if you don’t need a permit, getting up on your roof is dangerous, especially if you have an aggressive pitch or slippery roof material, like metal. Hiring a chimney professional guarantees the job is done correctly and keeps you safe from injury.

You can replace a roof in the winter, though it’s not the most popular time to do so. The biggest drawback of winter roofing work is the weather. Snow and ice make for dangerous, slippery working conditions. Plus, shingles can only be installed in temperatures above 40 to 45 degrees. 

The best time to replace a roof is in the spring or fall when the weather is mild. However, you can likely save some money by booking the job in the winter off-season, when roofers have more availability. 

Yes, it’s possible to replace drip edge flashing without removing shingles, but it’s not a good idea. You’ll have to lift the bottom shingles up to remove the old drip edge, install the new material, and then lay the lifted roofing material over the new drip edge. Bending roof shingles can cause damage, and if you have ongoing issues with roof leaks that prompt drip edge replacement, it’s a good idea to consider a roof and drip edge replacement to avoid ongoing issues.

The terms “roof shingles” and “roof tiles” are sometimes used interchangeably, but the term “shingles” most often refers to asphalt, rubber, metal, or slate shingles, and the term “tiles” normally means they’re made from clay or concrete. In all cases, shingles are small, rectangular components that a roofer layers in an overlapping pattern to protect the structure underneath from the elements.