Get matched with top countertop and backsplash pros in Runnells, IA

With the cost of kitchen countertops ranging from $1,900 to $4,300, you’ll want to choose a countertop material that’s durable and cost-effective. Marble countertops will come in on the high-end, whereas corian, quartz, stainless steel, and granite will run in the middle range. Butcher block and laminate are the most budget-friendly—and many DIYers choose to install butcher block on their own because it’s one of the more accessible countertops.

Porcelain countertops have a fairly long life span, sometimes lasting for decades. Depending on how much wear and tear you put your countertops through, it could last 25 to 50 years. But be warned, porcelain is also prone to cracking, so as long as you take good care of it, you’ll have those countertops looking brand new for years to come.

The frequency for sealing marble countertops depends on several factors, including the quality and color of the stone, the type of sealant used, and the amount of traffic the surface receives. Marble has a porous surface that requires sealing to maintain its shine and resist scratches. As a general rule, you should seal countertops at least once a year. However, for heavily used surfaces, like those in a busy kitchen or family bathroom, you may need to reseal them every three to six months. Conversely, countertops in a rarely used guest bathroom might only need resealing every few years.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.