Get matched with top dryer vent cleaners in Postville, IA

Yes, you can snake a roof vent. This is one of the best ways to clear a problematic clog in a plumbing vent. You can either snake the vent by climbing on the roof and sending the plumber’s snake or auger directly down the vent opening, or you can cut a hole in the vent from inside the attic and snake it from there.

You can install a washer and dryer in most places throughout your house, provided you have the proper plumbing lines and electrical outlets needed. You’ll also need enough space to install ventilation for the dryer, which can limit where you install the washer and dryer. Common places to install a washer and dryer in a house include a dedicated laundry room, the basement, a bathroom, a hall closet, or even a kitchen. Keep in mind: It will cost a lot more money to install a washer or dryer in a space that is not currently designed to support these appliances.

Yes, mold can grow in a wet dryer vent. Mold is a type of fungi, and fungi thrive in warm, moist conditions. Dryer vents need to be aired out so heat can escape and moisture can dry. If your dryer vents aren’t properly vented, the trapped heat and moisture will cause mold to grow, and the mold can spread to the dryer and even your clothes. Not only can this leave a musty smell on your freshly laundered clothes, but—more importantly—it also poses a health risk.

The length of an allowable dryer vent varies based on the local building codes and regulations. Typically, the maximum range is 25 to 35 feet. However, if the vent must have any 90-degree turns, you may see a reduction of five feet from the maximum. Some municipalities may have no specific maximum allowable length as part of the code. Typically, installers will run the vent over the shortest possible distance for safety. The dryer vent cleaning cost is less with a shorter vent length as well.