Best door pros near Greene, IA

You can open up more space between the door and the floor by sanding the bottom of the door, but it will take longer compared to using a hand planer. However, you could use a belt sander, which some believe is even better than a hand planer for planing a door. Also, it could leave a smoother finish on the bottom of the door.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.

You put shims between the three-sided frame to which the door hinges are attached and the framing of the rough wall opening. Using shims like this will center your door in the wall opening and allows you to make small adjustments to get your door plumb and level for smooth operation. Your shims and the gap they fill will be covered when you install door trim, so don’t worry too much about the appearance.

Yes, prehung doors include a door jamb. Prehung doors are sold as a single piece with the door frame already constructed, including the hinges. The only part missing is the trim, which you add after fastening the door. They are more expensive than slab doors but are quicker and easier to install. Prehung doors come in an array of sizes, so there’s likely an option to fit any doorway you need.