Get matched with top locksmiths in Crescent, IA

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.

The good news is that, yes, you can change locks yourself. Many people find it’s an easy DIY project that requires few tools and not much expense (depending on which lock you’re installing). If you have trouble with any part of an installation, you can always call a locksmith to help finish installing them.

Rekeying is typically cheaper than replacing locks. Professional rekeying costs between $40 and $160, sometimes with an additional fee of $15 to $40 per lock. A locksmith's hourly rate averages around $75. If you do it yourself, a rekeying kit can cost as little as $10. In contrast, replacing a lock costs between $130 and $500, with an average of around $315, depending on the hardware and lock type. Rekeying is a simpler process that changes the key for your existing lock without replacing the hardware. It is a good option if you have a quality lock that works well, you've recently moved, you've lost a key, or you need a quick security upgrade. The best choice depends on the condition of your current locks.

There are many types of deadbolts, but these tips work on most. First, address any grime buildup. A bit of WD-40 will loose up rust and dirt so the deadbolt can turn. Inspect the door and frame alignment if this doesn't resolve the issue. Adjust the strike plate or the deadbolt's position to improve alignment. If the problem persists, disassemble the lock to inspect for damaged or worn parts. If you are unsure how to do it, hire a local locksmith.