Get matched with top septic tank pros in Baxter, IA

While mound septic systems can provide cost-effective wastewater treatment in many instances, they do come at a significant initial installation cost and require a lot of space on your property for the mound and its replacement field. The installation cost is so high because this is a project that requires an exceptional level of skills and expertise to execute properly.

A septic system's lifespan typically ranges from 15 to 40 years, with a common average of 20 to 30 years. The longevity heavily depends on the tank's material, maintenance diligence, and usage habits. With proper care, lifespans can reach the upper end of this range.

Lifespan by Tank Material:

• Concrete: 20 to 40 years

• Plastic or Fiberglass: 30 to 40 years

• Steel: 15 to 20 years

To maximize your system's lifespan, follow these maintenance best practices:

• Regular Pumping and Inspections: Have the tank pumped every three to five years and schedule professional inspections regularly.

• Mindful Usage: Only flush human waste and toilet paper. Avoid putting items like cat litter, paper towels, cigarette butts, fats, grease, oils, or coffee grounds down your drains.

• Avoid Chemicals: Do not pour harsh chemicals into the system.

• Water Conservation: Reduce the amount of wastewater your system has to process.

• Protect the Drain Field: Avoid driving or building heavy structures over the drain field area.

There should be a red button or an on/off switch on or in your box. Press the button or flip the switch, then turn it back on by doing the same action again. If this doesn’t work, reset the breakers inside the box by flipping them off and back on again. After this, your alarm should stay off if there’s nothing wrong with your system. However, if the alarm is still sounding and there’s still a red light on, it’s time to call a pro for a diagnosis.

There are a couple of ways you can determine the depth of your well. One method is to use a device called a well sounder. This tool has a long measuring tape containing a sensor to alert you once the end reaches the water. 

Or you can DIY it by using a long tape measure with a half-filled bottle of water attached to it. Lower the tape measure into your well. Once you feel tension on the tape, you’ll know the bottle has reached your static water level. This will give you an approximate idea of your well’s depth.