Get matched with top chimney inspectors in Anthon, IA

Depending on your state, a home inspector may need a license. All states and the District of Columbia require home inspectors to undergo training. However, some states (such as New York, Texas, Washington, and Illinois) require state-issued licenses while others (including California, Colorado, Pennsylvania, and Virginia) do not.

Other professional certifications include the American Society of Home Inspectors (ASHI) certification, the International Association of Certified Home Inspectors (InterNACHI) certification, and the National Home Inspector Examination. Inspectors can also receive certifications in specialized areas. These can include structural specialties, like chimneys, swimming pools, or septic systems, as well as specific issues like mold, pests, or radon gas. Whatever your situation, make sure your home inspector is certified to handle it.

A pass/fail home inspection is a type of inspection that a buyer pays for with the understanding that the results will not allow for renegotiation. It’s most common in situations where the buyer waives a home inspection contingency to get their offer accepted when there’s a lot of competition for the home. The buyer will accept the house as-is without requesting repairs or renovations to fix potential issues, or they will consider the inspection a fail and will back out of the deal, losing out on the cost of the home inspection.

Asbestos can be found in many building materials, especially if the materials were installed more than 20 years ago. Asbestos-containing materials (ACM) can include:

• Acoustic ceiling tiles

• Furnace insulation

• Home appliances

• Fire-retardant clothing

• Cement pipe

• Pipe insulation

• Wall and ceiling insulation

• Vehicle brake pads

• Vinyl flooring

• Sprayed acoustic ceilings

• Stove insulation

• Patching compounds

• Textured paints

• Roofing shingles

• Siding

Measure from zero on a measuring tape by placing the metal hook right up against the edge of what you need to measure. You can also latch the hook onto an open edge—of, say, a table—to accurately measure as well. If you begin at the 1-inch mark, you'll need to subtract an inch from your total.