Top-rated carpenters.

Get matched with top carpenters in Afton, IA

Enter your zip and get matched with up to 5 pros

Find Carpenters in Afton

Avatar for Field carpentry
Field carpentry
5.0(
1
)

Serving Afton, IA and surrounding areas

Approved

Free estimates

Warranties offered

Small jobs welcome

"Exceptional work and a true professional. Highly recommend and would happily hire Codey again. Codey helped us complete a partially finished basement office by adding trim and casing around two doors and an egress window, installed a bifold closet with trim/casing, and added baseboards around the room. His work was clean and detailed and the room looks great due to this. He also fixed several issues from a previous contractor along the way, including resizing a door cutout that was too small, adjusting another door that never closed properly, and installed a header for the closet that a previous contractor did not. Overall his work was exceptional, he was transparent on all aspects of the project, very polite, and completed ahead of schedule. Highly recommend."
2 neighbors recently requested a quote
Avatar for Sentri Homes
Sentri Homes
2.3(
21
)

Serving Afton, IA and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."
29 neighbors recently requested a quote
Avatar for Honor Code Construction
Honor Code Construction
New to Angi

Serving Afton, IA and surrounding areas

Approved

Been a carpenter for over 20 years in the Des Moines area. Have worked with many different builders and realtors over the years doing simple tasks to complex builds and remodels. I enjoy my work and will never leave a project I cannot live with myself.

Avatar for Essence Construction, LLC
Essence Construction, LLC
4.4(
52
)

Serving Afton, IA and surrounding areas

In business since 2000

Free estimates

"Worked with my budget and used my old materials. They did quality work and replaced only what was needed. Worked around weather and kept in touch for changes in schedule and budget."
Deck
Deck
Deck
Deck
Fence post

+968

Response time8 hrs
Response rate93%
Recommended by100%of homeowners
Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)

Serving Afton, IA and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Avatar for Homemade Design
Homemade Design
3.7(
322
)

Serving Afton, IA and surrounding areas

In business since 2006

Credit card accepted

"I will be very honest in my assessment of Amanda. Sitting in front of me I have a beautiful design for my living room and dining room in a townhouse I owned in Houston. Amanda picked beautiful, comfortable chairs, nice wallpaper and very cool lighting.  The problem with Amanda is not her ability to design an amazing room - she certainly is very talented. The problem I experienced with Amanda was the inability to handle the details, to stay on top of the project, and to assist with actually putting the room together. This may be a problem in general, with all on-line designers, who knows.  I do know that I ordered this package from Amanda in August of 2013.  My first conference call with her was some time around October, and my designs were given to me (not the complete design) some time in December.  I learned quickly that when Amanda says she would have something for me "by the end of the week," she really meant about 2-3 weeks down the road.  In any event, I was elated when I got my first design for my dining room. I delayed placing an order because the stuff she picked was a bit pricey and I wanted to save my money over the holidays. I placed an order in early February for two rugs and a chandelier - totaling well over $3,000.00. Amanda advised that it could take about 4 weeks for the rugs and chandelier to come, which was no problem with me.  8 weeks passed and I began emailing Amanda. (Mind you that the money was charged to me immediately, with no follow up emails from any of the manufactures, no indication of shipping, nothing... so I began to feel uneasy). After a couple of unreturned emails and phone calls, Amanda apologized for the delay, mentioned that she was surprised I hadn't received anything yet, and explained to me her mother was in an accident. No biggie, but I explained to her that I would be out of the country in mid-April and unavailable to sign for anything. She assured me the rugs were en route from Georgia and would be there before I leave.  As far as the chandelier, we discovered that they had attempted to deliver it, but Amanda had provided them the incorrect phone number, so they were not able to get in touch with me. I asked her to correct this so I could receive the chandelier. Because I never heard back from the company, and no additional attempts to deliver were made, I am assuming she did not do this.  And, as could be expected, the rugs did not come before I left - they came when I was in Germany and when no one was home to sign for them. Since over 12 weeks had passed since my order, I contacted my credit card company and initiated a charge back.  They agreed with me that it was concerning that so much time had passed with very little contact, and immediately refunded my money. (Amanda and her husband eventually tried to fight my chargeback, but they were of course unsuccessful. I did not have the goods, and they never attempted to re-deliver them). Also, I will add the following to things about my experience with Amanda, which bothered me:
1) I was told in January I would have curtains and throw pillows picked out "by the end of the week." Those never came.
2) Amanda said she had a client in Florida who would ship me a sample of the wallpaper. This never came either. Amanda said it was shipped to me - I never received it and kind of doubt it ever was.
So basically, $500 dollars for two rooms of design got me some dining room chairs (albeit - awesome), a table she picked out that was too expensive so I found a different one, some cool wallpaper that I will never be able to get a sample of, two expensive rugs and a chandelier that resulted in a credit card fight and a headache. At the end of the day, my advice is that if you want a talented and friendly person to design your home, don't mind waiting some time for it all to come together, and are cool with locating the stuff and putting it all together on your own, Amanda may be it for you. If you want a designer who is good at following up with details, assuring stuff gets to you in a reasonable time, and assists with pulling the room together and finalizing your project, I would highly recommend you find someone else."
Pennsylvania Master Bathroom
Boston Small Condo Kitchen
California Client Saves with HMD Designer Discounts
Recommended by54%of homeowners
...
Showing 1-10 of 60
Carpentry questions, answered by experts

Balcony construction or replacement typically requires a building permit from your local permitting authority. Safety and building integrity are the main reasons for the need to obtain a permit and the subsequent inspections. In some cases, especially cantilevered balconies, your municipality may also require the oversight and signature of a structural engineer.

Yes, you will need a jack for a rim joist replacement. To prevent sagging and facilitate the removal of load-bearing wood, you’ll need to relieve the pressure from this joint before beginning work. 

Due to hydraulics and other specialized equipment, a sill plate and rim joist replacement are not typically a DIY project. Hiring a professional structural engineer and experienced contractors is the best approach to replacing rotted sill plates and rim joists.

Yes, a one-story house can have a load-bearing wall. The load-bearing walls in a single-story home are usually the exterior walls. If the house has a basement with exposed walls, the arrangement of the beams can help indicate what walls are load-bearing.

Accurate measurements, sturdy materials, and seamless integration with other structures.

While some highly experienced homeowners can frame a house independently, it is not advisable. You will need ample carpentry experience, a team of helpers, and professionals to sign off on your work to meet local building codes. For the safest outcome, we recommend buying or building a house with the guidance of professionals.

The Afton, IA homeowners’ guide to carpentry services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"