Asbestos testing takes place in two stages—collection and lab testing. Collection can take less than 20 minutes if a professional manages to get a direct sample. If air samples are required, then the pro will set up a testing device and return to collect it. In both cases, the sample is sent to a lab and results are confirmed or denied usually within one to two days.
Asbestos was most commonly produced and integrated into building products from the 1920s to the late 1980s. In reality, asbestos use should have ceased much sooner because asbestos was linked to cancer in studies produced as early as the 1950s. You can even extend that number past the 1980s due to stockpiled materials and because some countries treat asbestos use differently. It may also be found more in commercial applications than residential.
If you hire a dedicated asbestos inspector near you in addition to your local home inspector, it will cost between $200 and $800. If, however, your general home inspector happens to be certified as an asbestos inspector, they can charge you a smaller fee and tack on the cost to the home inspection. In general, home inspectors do not do physical testing, but will provide a visual assessment so you know what you are working with.
In the 1980s, the use of asbestos in house siding materials underwent a significant decline, ultimately being phased out by the mid-1980s to early 1990s. This change was largely due to a growing awareness of the severe health risks associated with asbestos exposure, particularly its link to lung diseases and cancers. With increased public concern and regulatory agency involvement, building codes and regulations were updated to restrict the use of asbestos in construction materials.
Unfortunately, home inspections do not check for asbestos because of the liability factor involved. That’s why you should hire a trained professional with specialized equipment to test for it.
They will inspect all areas of the home and take samples of various materials to test. Opting for an asbestos inspection can prevent the risk of exposure to this hazardous material and save on costly repairs that may be required.
The Buchanan, GA homeowners’ guide to percolation testing services
From average costs to expert advice, get all the answers you need to get your job done.
Most building projects and septic installations require soil testing to ensure proper drainage. Learn how much a perc test costs and what affects costs.
A perc test for septic analyzes the absorption rate of the soil where a tank is going to be installed. Learn more about the test, cost, and passing grades.