Get matched with top fencing pros in Blythe, GA

A fence gate can sag for several reasons. The issue often stems from the hardware, such as damaged or bent hinges, or loose screws that can no longer support the gate's weight. The gate frame itself might also have come out of square due to failing supports. Alternatively, the problem may not be the gate but the supporting fence post, which could be leaning or out of place. In many cases, fixing a sagging gate is as simple as tightening the hinge screws or upgrading to more robust hinges.

A high-quality wrought iron fence is one of the most durable options available and can last a lifetime, or even centuries, with proper care. However, wrought iron is susceptible to rust and corrosion if not maintained.

To maximize its lifespan, regular maintenance is required. This includes:

• Cleaning the fence with soapy water every six months.

• Scrubbing away any rust or corrosion as soon as it appears.

• Applying a new coat of paint or refinishing the fence every few years to protect the metal from moisture and oxygen. The recommended frequency varies, with sources suggesting anywhere from every 1 to 10 years.

If significant rust develops, it's wise to hire a professional fence repair company to clean the rust and reseal the fence. The cost to refinish a fence is typically between $5 and $12 per square foot, a worthwhile investment to ensure its longevity.

The most common type of metal fence today is one made of either steel or aluminum. These materials are relatively easy to fabricate, making them much more cost-effective than traditional metal fencing handmade from wrought iron. They’re also much lighter and easier to install, contributing to their affordability and making them more DIY-friendly.

You can DIY a stockade fence installation, but prepare to put in some good sweat equity. For the best results, carefully plan the exact location of your fence before you break ground. In particular, carefully map out your post locations before setting them in concrete. Be sure to call your local utility company before digging to avoid damaging underground wiring and causing severe injury.

On the other hand, installing stockade fencing on your own might sound too overwhelming. It’s certainly time-consuming and labor-intensive. Besides the hard work, you must install it properly to avoid gaps. Unless you’re confident you can get the job done right, hiring a privacy fence installer near you is the way to go.