Get matched with top countertop and backsplash pros in Holmes Beach, FL

Corian® is a popular countertop alternative to quartz. Created from an acrylic resin and natural minerals, Corian® resembles quartz and offers some similar benefits, but it comes at a cheaper price. Corian® countertops cost an average of $26 to $65 per square foot, which is less than half of what quartz countertops usually cost. The downside is that Corian® isn’t as durable as quartz, particularly regarding its resistance to scratches and high temperatures.

Deciding between marble and granite for kitchen countertops depends on your personal priorities, budget, and style. Both materials have similar costs for material and installation.

Marble offers a luxurious aesthetic and timeless beauty, but it is more expensive and requires more maintenance. It is susceptible to staining and etching from acidic substances like coffee, wine, or tomato sauce if spills are not cleaned up quickly.

Granite is highly durable, heat-resistant, and easier to maintain, making it a practical choice for busy kitchens.

Both materials should be sealed to protect against damage, but they can still be vulnerable to stains if spills are left on the surface for too long.

No, you should not put a hot pan or pot directly on a quartz countertop. While quartz is generally heat-resistant, the resin binders used in its manufacturing are sensitive to extreme heat. Placing a hot pan on the surface can damage the resin, leading to discoloration or other cosmetic issues. If the heat exceeds 150 degrees Fahrenheit, it can cause permanent damage, such as burns or even cracking. To protect your countertop, always use trivets or hot pads.

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.