Get matched with top countertop and backsplash pros in Pinellas Park, FL

Durable, contemporary concrete countertops can increase home values. However, they might not offer as high an ROI as quartz or granite surfaces, which offer a timeless aesthetic and durability likely to appeal to a range of home buyers. Installing new countertops is a home improvement that can yield an average of 60% to 80% ROI when done well, using quality, perennially popular materials.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The timeline to install countertops largely depends on the materials and the job size. Installing granite countertops takes anywhere from two to seven hours, though complex designs can pass the eight hour mark. Average-sized quartz countertops take two to five hours to install, though most pros will recommend a 24-hour settling period. Marble, on the other hand, is finicky and can take up to two whole days to install. No matter how you slice it, however, a professional is going to complete the job much quicker than an amateur.