Get matched with top door pros in Holmes Beach, FL

The difference between a mortise latch and a tubular latch is how they're mounted. A mortise latch has a single integrated lock body. One long rectangular space is cut into the door to contain it. A single keyhole is used to unlock both the dead bolt and latch from the outside. A tubular latch is a standard setup with a dead bolt separate from the regular spring bolt latch.

Doors get more sticky in the summer. Contrary to popular belief, doors can also stick in the winter since humidity causes doors to stick during both seasons. However, thermal expansion and humidity in the summer mean that the thermal heat and moisture in the air both play a role in causing a door to stick.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.

Most of the time, a squeaky door is the result of dry hinges, where metal parts rub together without enough lubrication. Dirt, dust, or rust can also build up inside the hinge and add to the friction. Loose screws or slight misalignment can shift things just enough to create that irritating squeaking noise. Worn-out hinges or swelling wood from humidity changes can also be part of the problem on older doors. A good cleaning and proper lubrication usually take care of it, but if the squeak sticks around, it’s worth checking for bigger issues with the hinges or alignment.