Get matched with top affordable plumbers in Washington, CT

Fix your leaking shower ASAP. By the time you realize your shower is leaking, chances are it’s been leaking for a while. Consider how often you use the shower to determine how much water has passed through the leak. Because shower leaks don’t fix themselves or get better with time, leaving them unchecked can lead to more damage and higher repair expenses. Use temporary fixes, but you should aim to have a professional repair your shower immediately.

There are three main types of shower valves: pressure-balancing, thermostatic, and diverter. Pressure-balancing and thermostatic valves are both considered mixing valves because they regulate water flow and temperature, but they do so in different ways. A pressure-balancing valve senses changes in water pressure, such as from a flushing toilet, and adjusts the incoming hot and cold water to maintain a consistent temperature; these typically use a single knob. A thermostatic valve uses a thermostat to precisely control the water temperature and requires a separate control to adjust the water volume. A diverter valve directs the flow of water from one fixture to another, such as switching from a tub faucet to a showerhead in a tub-shower combination.

The toilet should rest 10, 12, or 14 inches from the back wall. As for other clearances, 15 inches is the minimum distance from the flange to any side wall or nearby fixture, including the shower, tub, and sink. Modern codes also require at least 24 inches of clear space in front of the toilet.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.