Get matched with top window pros in North Haven, CT

Your new windows may let in more noise than your old windows because they are not the right size or they were installed improperly. Improper installation, or choosing windows that are too small for the opening, can create gaps around the window that let in noise.

Another factor could be the STC and OITC ratings. If your new windows have lower ratings than your old windows, this means they have lower performance when it comes to dampening noise from the outdoors.

There are several ways to reduce noise coming through your windows. You can seal gaps around the window frames with acoustic caulk or fresh weatherstripping to reduce noise and air leaks. Installing sound-dampening curtains, thick blinds, or shades can also help deaden sound vibrations. For an additional interior barrier, consider installing an acrylic or plexiglass sheet inside the window, which stifles sound while still allowing for outdoor views. Another strategy is to add external barriers, like dense shrubbery or a sturdy fence, to block neighborhood noises. If these methods are not effective enough, it might be time to install new noise-canceling windows.

Yes, you can replace the frame around a window by completing either a partial replacement or a full replacement. With a partial replacement, your window specialist will remove the trim around the window and replace or repair just the damaged portion. For a full replacement, your tech will need to remove the window, replace the frame, and then reinstall the window.

Whether you need a permit to install a bay window depends on the project's scope. Replacing an existing bay window typically does not require a permit. However, if you are adding a new bay window, requirements can vary. Adding a new bay window to the front of your house usually requires a building permit, while adding one to the side or back of your house often does not. It's always best to check with your local municipality to confirm the specific requirements in your area. Additionally, if you live in a historic district, you should consult your neighborhood association to ensure your project complies with their construction guidelines. If you're unsure about the process, a professional can provide guidance.