Get matched with top fencing pros in Swink, CO

Making a homemade pallet fence involves marking out the fence line and leveling the ground along it. Then, install metal or wooden fence posts that you slide the pallets on top of (two posts per pallet). Fasten them together with 2x4 wood boards that act as an extra layer, keeping the pallet fence secure.

Most homeowners don't need to inform their neighbors before constructing a fence, according to the law, but you will need to make sure that you’re building on the property line or on your side of the property line. Otherwise, the neighbor could complain, which would require you to tear down and reinstall the fence. In any case, keeping them in the loop is the neighborly thing to do!

Whether you inform your neighbors or not, always use property records and a land survey to ensure your fence stays within your property boundaries.

You have several options for anchoring a temporary fence to keep it from falling down. Sandbags can be used as a standard weight, but they may blow away or fail in strong winds and inclement weather. Spikes and bolts are a cost-effective and easy-to-install alternative, but drilling can be difficult if the ground is frozen, too soft, or too hard. Another option is wind braces, which should be bolted into the ground to withstand turbulent wind; however, like spikes, they can be challenging to install in very soft or hard ground.

Do you need a permit to build a fence if you are simply replacing an existing fence? Whether you need a permit in this case depends on your local laws and regulations. Most municipalities consider a fence replacement project as being equal to building a new fence, so you likely will need a permit. Check with your local building inspection department or zoning department to see if you need a permit. If you hire a local fence contractor, this pro can take care of obtaining all permits for you.