Get matched with top epoxy flooring pros in Milliken, CO

Yes, you can seal old concrete, but proper preparation is essential. Before sealing, ensure the concrete is clean, dry, and free of any old sealant. To check if resealing is necessary, place a few drops of water on the surface; if they are absorbed in less than five minutes, it's time to reseal. If you are using the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are applying a different type of sealer, the existing one must be removed. Additionally, repair or fill any cracks to create a smooth base before you begin sealing.

The best way to resurface a concrete porch is to clean and prep the surface, pour a layer of concrete on top, allow it to cure, then seal it. A concrete overlay provides a durable layer and enhances your porch's look. You can even choose a stamped overlay to make it look like stone or brick. To ensure structural integrity, repair concrete cracks before applying the new concrete. If the existing concrete is in significant disrepair, consider removing and replacing the concrete instead of an overlay.

It costs between $600 and $8,400 to stain an average-size concrete patio of around 300 square feet. The wide price range accounts for intricate stains that incorporate multiple colors and stenciling, high-end sealers, and special touches, such as stamping or concrete polishing. Prices can also vary if you need to make multiple repairs to your patio before adding the stain and seal.

Since epoxy products are hazardous to handle, it’s best to leave this job to a professional epoxy flooring contractor. These flooring professionals will have the appropriate protective gear to stay safe during the application process and will use the correct tools needed for the job. In addition, if not correctly applied, the epoxy won’t harden correctly, causing performance issues. Hire a professional epoxy flooring contractor to guarantee a smooth, even finish for your flooring.