"Tom at TAS Engineering was professional, friendly, helpful, patient and highly competent and efficient. He did the assessment of my attic structural issue and identified the simplest and most cost-effective solution. He ensured that my contractor did the work to his specifications and provided the certified engineering letter that all had been addressed properly. This was exactly what I needed. I would highly recommend him and would hire him again."
"Wow. I am thoroughly impressed with Justin and AE Leuken engineers! While other Structural engineers demanded site visits and where going to take weeks to design and approve an Egress window well for a finished basement, Justin jumped all over my requests and had everything completed in 3 Days!!! He was VERY easy to work with, communicated efficiently via text & cell, and even worked on the project at night and early in the morning. Justin was also very privy to the building codes at PPRBD, which many local Structural Engineers were not. Definitely contact Justin and AE Leuken Engineers if you want to get the job done right and quickly!"
"Jeremy was extremely professional and efficient and was so amazing to work with!!! He literally called me the very night that I submitted a request for an engineer. Very impressive and would absolutely hire him again or refer him to anyone who needs a structural engineer."
"We had a great experience working with Vital Architecture and highly recommend her.
For Little Village Childcare, she helped us save money by confirming certain landlord requests were not required by code and securing a waiver that saved space and costs.
She also reduced civil engineering expenses by preparing the playground drainage plan herself.
During construction, she provided extra support at no cost and helped us handle contractor changes wisely.
For another church childcare project, she identified zoning issues early so everyone understood the risks.
In Colorado Springs, she warned a tenant about higher plumbing costs required by childcare regulations, helping them avoid a bad lease.
For an adult care project, she reviewed the food area and explained new kitchen and ventilation requirements.
Carmen is knowledgeable, thorough, and truly looks out for her clients’ best interests."
"Designed a complete remodel of the back porch enclosure on my house. Easy to work with. He came and checked it out before I had a survey done(didn’t know i needed one). Survey was scheduled out 3 weeks so he offered to come take measurements for a fee and then he could get started. I accepted and a week or so later we had our plan. When the survey was completed the updated Schematic hardly changed. Wonderful job."
We have a single mission: Complete Customer Satisfaction! We have consistently focused on the needs of our customers, providing personalized attention and a stress-free experience.\nYou will find us to be competitively priced with close attention to the details.\nOur reputation is based on service, safety, and quality, regardless of how large or small the job.\nWe look forward to building a lasting relationship and guarantee your satisfaction!\n
With years of experience in the construction industry, we are the experts you need to take care of your home or business. We handle all of your fabrication and design needs with great care. We will treat your home as we would treat our own. Give M9 Designs a call today, we look forward to working with you!\n
Structural Engineering questions, answered by experts
Yes, an LVL beam is more affordable than the cost of a steel I-beam, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you’d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it’s also more similar to traditional wooden beams and doesn’t require as much retrofitting to connect joists.
It is not recommended to cut or drill into LVL (laminated veneer lumber) beams. As major structural components of a home, their composite structure can be compromised by alterations, which can weaken them and lead to cracking over time. If you must make modifications to an LVL beam, it is crucial to consult a structural engineer or general contractor first. A professional can advise on whether it's safe and provide specifics on the appropriate bit size, depth, and directionality for any necessary drilling.
First, most contractors will have a structural engineer create a report and plan for your project to ensure it’s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening—allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they’ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar.
Water can seep into porous materials like wood beams, floor joists, and roof rafters within minutes, but they’ll need to see prolonged exposure before you have structural damage. Mold can start growing within 24 hours, and mold can eat away at the structural components over time. Wood rot is more of a concern, though. Wet and dry rot are fungal infections that set in in moist conditions and rapidly deteriorate wood, causing major structural damage within just a few months in some cases.
According to the Earthquake Country Alliance—a public and private alliance in California that works to improve earthquake and tsunami readiness—reports that unreinforced masonry, such as stone, bricks, and hollow clay tiles, is more susceptible to earthquake damage. The mortar between bricks isn’t as stable as other building materials and methods.
The Larkspur, CO homeowners’ guide to structural engineering services
From average costs to expert advice, get all the answers you need to get your job done.
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total in Denver, CO.
Find out the average beam installation cost in Denver, CO. Learn what you can expect to pay for materials, labor, and structural engineers for your project.
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Spotting deep foundation cracks or sagging floors? Learn about structural engineering costs, serious warning signs, and how to hire the right local pro.
It can be hard to choose the right pro for any job, but it matters. Learn how to hire a structural engineer who'll get the job done right from start to finish.
