Get matched with top fire pit installation pros in Shingle Springs, CA

Baseboard heaters are generally safe and efficient, but they can be dangerous if safety precautions are not followed. To ensure safety, do not block the heaters with furniture, drapes, open doors, or other items, and maintain clear space around them for proper heat flow. Regularly check that items have not fallen on or under the units. If you have children or pets, make sure they stay clear of hot heaters to avoid burns. For added safety, consider models with an automatic shut-off feature and have them professionally tested. If a problem occurs with a baseboard heater, always contact a qualified electrician or HVAC professional for repairs.

After a house fire, you should not reenter your home unless the fire crew has told you it’s safe to do so. In the longer term, you should not attempt to make repairs to the house on your own. Professional crews are trained to clean up after a fire (including smoke and soot damage), dry out any water damage from the firefighter crews, and make the necessary structural, plumbing, and electrical repairs—and this is all likely covered by insurance.

Shiplap can be safe for a gas fireplace, but you should consult with a fireplace installation pro before proceeding. You need to make sure your project meets building and safety codes since shiplap is made from flammable wood. You may need to install another non-combustible material, like stone or brick, around the fireplace for a certain amount of space before you can add shiplap.

Yes, fire extinguishers eventually expire. However, the good news is that a properly stored fire extinguisher can last a decade or longer. They don’t have an expiration date on the canister, but you can check the manufacturing date on the “UL” nameplate near the classification information. Maintenance will also give your fire extinguisher longevity. Check the gauge at the top of the extinguisher every month. You'll want to make sure the gauge needle is in the green section, and if a hose or nozzle has been used or damaged, you need to replace it.