Get matched with top sandblasting pros in Lone Pine, CA

Q: What does sand do?

• <div><p>Sand is a common sublayer for hardscape features like driveways, paver patios, and more. Most projects that involve sand require a 1-inch layer to promote evenness, drainage, and weight distribution. For further drainage, most projects have a 6-inch minimum layer of gravel beneath the sand. </p><p> </p></div>

Q: Do you sand concrete wet or dry?

• <div><p>You can concrete can be done when it&rsquo;s wet or dry. However, it&rsquo;s safer when wet, as harmful dust and chemicals are present. Sanding it when dry is faster, but you&rsquo;ll agitate more dust and chemicals, meaning you&rsquo;ll need to be more careful.</p></div>

Q: How much does it cost to sandblast a door?

• <div><p>Your pro will most likely bill you at an hourly rate of <b>$50 to $80 per hour</b> to sandblast a door due to its small size. This type of job won't take long, so if you have other surfaces that need cleaning, schedule those tasks at the same time to get your money's worth from your pro's visit.</p></div>

Q: How long should it take to sand stairs?

• <div><p>If you&rsquo;re DIYing the project, it could take up to a week if you aren&rsquo;t able to dedicate full-time hours. If you hire a professional and they arrive with a team, expect your stairs to be sanded in as little as 2 hours (for simple projects). Finishing the stairs takes a while longer as there are drying and sealing times to consider, but the actual work will take much less time than the sanding portion. </p></div>

Q: What is the best way to sand a deck?

• <div><p>The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Lone Pine, CA?

Select your specific project to find the pro for you.

Verified Reviews for Sandblasting Service pros in Lone Pine, CA

*The Angi rating for Sandblasting Service companies in Lone Pine, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Sandblasting Service needs.

*The HomeAdvisor rating for Sandblasting Service companies in Lone Pine, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Sandblasting Service needs.

Last update on August 27, 2024

Reviewed in August 2024
Very professional. Polite. Took his time to inspect everything. Would hire and recommend to family and friends.
Smart Start Home Inspections
Request a quote
Reviewed in August 2024
Eddie doubled the estimate after they started because I did not have the correct 220 volt outlet for the giant sander.Wanted $700.00 to just go away so I paid the extra $1500.00. Should have paid the $700 to have him leave. House was trashed and covered in fine brown dust, Eddie told me to hire...
Jen Hardwood Flooring
Request a quote
Reviewed in May 2021
Showed up on time and kept the work space clean. The estimated price quoted was the same as the final price. Great job!
Baldwin Builders
Request a quote
Reviewed in February 2019
Josh and Perry called to see if they could come before scheduled appointment. Dressed very professional. I showed them the areas I wanted work done then Josh went over each project giving suggestions if necessary he then went over his folder explaining how they arrive that the cost and what...
Home Team Electric
Request a quote
Reviewed in November 2017
You could not ask for a better electrician than Mike from Green Solar. He was nice, clean, tidy and on time. QUALITY WORKMANSHIP!
Green Electric Solutions
Request a quote
Reviewed in April 2017
Excellent work and quick. Sometimes difficult to get questions answered and they did not schedule the final inspection.
Timothy W. Morris
Request a quote
Reviewed in April 2016
Just a terrific guy. We are looking at front landscaping as well and will be in touch to see what we can do. Will hire again & recommend highly
Accurate One Air Conditioning Heating & Plumbing
Request a quote
Reviewed in January 2016
He's an honest man with Christian values. Clean, always wiped his feet off, didn't leave a mess.
David Pangus Plumbing
Request a quote
Reviewed in November 2015
They did a really good job.
Fire Tech Chimney Specialists
Request a quote
Reviewed in April 2012
There was good and bad. The good was that they got the job done. Typical of many contractors they came and went due to having many projects going, so it took longer than we expected. They didn't seem too familiar with state laws and permit requirements however. When they were laying the pipe...
Ira Hansen and Sons Plumbing
Request a quote

Find Sandblasting pros in Lone Pine

AA Flying Baldy LLC DBA AAFB Blasting

5.0(

)

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Lone Pine, CA and surrounding areas

Approved

In business since 2022

Free estimates

Small jobs welcome

"The only company that actually called instead of text. Drove to my home the next day. Very personable and friendly. Efficient job performance. Cleaned up meticulously after completing the sandblasting. Reasonable pricing. I would highly recommend this person and company."

+76

Response time2 days

25 neighbors recently requested a quote

Recommended by14%of homeowners

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Lone Pine, CA and surrounding areas

In business since 1982

Free estimates

Credit card accepted

"The provider showed up on time as promised. After about 40 minutes the service guy was wrapping up and had to ask him to redo some sections that were clearly not clean. Also missed stairs completely. They did finish it up and final job was fine. Had some trouble communicating with service guy as his English was limited. Wasn't terrible but wouldn't use again.
"

Recommended by77%of homeowners

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Lone Pine, CA and surrounding areas

Free estimates

Emergency services offered

"I rent my property from another state. So I was looking for someone to do small jobs around my house when they come up. The price was way cheaper than I thought. He was very courteous and professional. I will for sure be using his services in the future. I've dealt with a number of other contractors and this one is by far the best I've seen in the AV.
"

Recommended by96%of homeowners

Request Quote

Sandblasting Services questions, answered by experts

Sand is a common sublayer for hardscape features like driveways, paver patios, and more. Most projects that involve sand require a 1-inch layer to promote evenness, drainage, and weight distribution. For further drainage, most projects have a 6-inch minimum layer of gravel beneath the sand.

You can concrete can be done when it’s wet or dry. However, it’s safer when wet, as harmful dust and chemicals are present. Sanding it when dry is faster, but you’ll agitate more dust and chemicals, meaning you’ll need to be more careful.

Your pro will most likely bill you at an hourly rate of $50 to $80 per hour to sandblast a door due to its small size. This type of job won't take long, so if you have other surfaces that need cleaning, schedule those tasks at the same time to get your money's worth from your pro's visit.

If you’re DIYing the project, it could take up to a week if you aren’t able to dedicate full-time hours. If you hire a professional and they arrive with a team, expect your stairs to be sanded in as little as 2 hours (for simple projects). Finishing the stairs takes a while longer as there are drying and sealing times to consider, but the actual work will take much less time than the sanding portion.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

The Lone Pine, CA homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Nick P. Cellucci
•
Apr 6, 2026Apr 6, 2026
How Much Does It Cost to Rent a Sandblaster? [2026 Data]
Sandblasting is a powerful method to remove paint, primer, and other coatings from hard surfaces. Learn the cost to rent a sandblaster and the factors involved.
Nick P. Cellucci
•
May 30, 2026May 30, 2026
How Much Does It Cost to Sandblast? [2026 Data]
The cost to sandblast your home’s exterior or another surface on your property depends on the method and the materials you use. Learn more with this guide.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Sandblasting Services
Wondering who to hire to sandblast? Learn how sandblasting services work, which contractors to call, and how to choose the right pro.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Sandblasting Pro
Learn how to hire a sandblasting pro for your project. Find qualified professionals, ask the right questions, and get expert surface cleaning.
Mitchell Grant
•
Apr 10, 2026Apr 10, 2026
What Is Sandblasting? Everything You Need to Know
Sandblasting is a powerful technique used to strip paint, rust, and other material from a surface. Learn when you’d use this technique, its cost, and how it works.
Deirdre Sullivan
•
May 21, 2026May 21, 2026
What Is Sandblasting Paint Removal?
Sandblasting is a paint removal technique that uses high-speed projection to strip a surface. Learn about sandblasting for paint removal and when you should avoid it.