Get matched with top door repair pros in Jamul, CA

Wood putty is an effective solution for repairing holes in wood doors, especially stained ones. For stained doors, it is crucial to match the putty color to the existing finish, as it's difficult to match new stain to old stain. You can buy putty that matches your door's color or blend different shades for a perfect match. For larger holes, you can first fill the void with spray foam and then apply wood putty over it. Another option for large holes is to use spray foam and spackle, and then paint the entire door for a uniform, fresh appearance. If the hole is very large, particularly in a hollow core door, replacing the door may be the most practical solution.

A few signs that you need a new door frame include: The door no longer fits properly in its frame and sticks or scrapes. You notice cracks, holes, or rotting. You feel a draft coming from around the door when it’s closed. You find yourself frequently needing to make repairs.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.

If you have an uneven door, the best way to level it or make it plumb is to use shims between the frame of the prehung door and the wall opening around it. Rough wall openings for doors usually leave substantial space for shimming so that you can make these adjustments. Start by shimming the hinge side of the door to center the prehung door, and then shim the lock side. Once it’s centered, hammer in the shims and continue checking that it’s plumb to get it to sit snugly in the wall opening and perfectly plumb and level.