Get matched with top solar panel pros in Igo, CA

Solar shingles typically last between 20 and 30 years, a lifespan comparable to that of traditional solar panels and standard asphalt shingles. The exact duration depends on the manufacturer and the quality of the installation. Because solar shingles are a newer technology, there is limited data on their actual long-term performance. Factors that can impact their durability and longevity include weather conditions, roof ventilation, and regular maintenance. To extend the life of your solar shingles, you should conduct regular inspections and cleaning, and make any necessary repairs as quickly as possible.

The average homeowner needs around 22 solar panels, but the exact number depends on your monthly energy consumption. Your solar professional should size your array to offset your consumption, meaning you’ll need fewer panels if you use below-average amounts of electricity, or more than 22 if you use above-average amounts of electricity. The number of panels also depends on the output of each panel. The average is around 400 watts, but you might need more panels if you install less capable equipment. Since there are so many variables, you should have a professional size your system.

Learn about common solar blockers in your area to determine how often you should wash solar panels and the best cleaning method:

• Soot: If you have a fireplace, soot can disperse and accumulate on the solar panels.

• Debris, dirt, and leaves: These natural elements require light cleaning. Being close to trees or living in a desert area can cause more of these to accumulate.

• Pollen: Areas with a high pollen count require more frequent solar panel cleaning, and sticky plant material requires a deeper cleaning.

• Bird droppings: Bird droppings are binding and more difficult to remove. Keep this in mind if you live near a lot of surrounding trees. 

Yes, it is possible to install solar panels on a tar and gravel roof, but it is not the ideal roofing material for a solar installation. The process requires roof penetrations to install the solar racking system. While installers will seal these penetrations, they still increase the risk of leaks. This risk is higher on tar and gravel roofs, which are often flat. Flat roofs are more prone to leaks than sloped roofs because they can pool water during heavy rain and hold snow for longer periods, exposing the roof to more moisture.