Get matched with top french drain pros in Earlimart, CA

Anything from debris, rust, ice, and even poor installation can cause clogs in your plumbing vents. Some signs of a clog include slow drains, gurgling sounds in drains and toilets, and bad odors. The bad odors are the most concerning, as these can include methane and hydrogen sulfide. Contact a plumber to come take a look if you notice any of these signs.

A bit of water in the bowl can help unclog a toilet, especially if you're using a plunger. However, if the bowl is full to the brim, you'll need to strap on gloves and remove some of the wastewater in a cup or container so it doesn't overflow when you try to unblock the pipe. If you're concerned about it filling further, manually close the flapper in the toilet tank or turn off the water supply to the toilet.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

A washing machine should drain the water used during its cycle through a drainpipe and out through the house’s plumbing. This is the same plumbing that sinks and shower drains run to, and if the U-bend is installed correctly, it shouldn’t smell. The total drainage from the house is then integrated into the city sewer system or, if you’re in the country, dispersed into a septic tank.