Best plumbers near Dos Palos, CA

Applying drain cleaner is a common DIY solution to clogged drains, but it can be extremely harmful to your pipes and lead to corrosion and leaks. It is almost always better to try snaking a clog than using a drain cleaner, but the best solution is to hire a professional plumber. They can locate the clog and gauge the severity using a camera system and then decide if using a plumber’s snake, auger, or drain cleaner is the best option to remove the clog and limit damage to your plumbing system.

There are several types of sink drain stoppers, including pull-out, twist-and-pull, and pop-up. Pull-out sink stoppers can be removed by pulling on the stopper until it comes out of the drain. A twist-and-pull design requires lifting then turning the stopper to lock it in an open position and the opposite action (turning, then pressing down) to close it. A pop-up sink stopper works by pushing down the drain cover to open or close the passageway. 

You can use a stud finder or wall scanner to detect plumbing behind a wall. A stud finder can help detect metal plumbing pipes. Or, you can use a wall scanner, a special tool that many pros use to detect pipes when water is running. Make sure a faucet is on nearby to get the water flowing before you fire up the wall scanner.

Water freezes at 32 degrees Fahrenheit, but the actual temperature that can cause frozen pipes can vary. Generally, it takes 12 hours for pipes to freeze at 32 degrees Fahrenheit.

Uninsulated pipes can freeze if it’s 20 degrees Fahrenheit or colder for over three hours. If your pipes are insulated, it can take six hours or longer for pipes to freeze. Note that some pipe types freeze more often than PEX pipes. Copper pipes freeze more often because the copper conducts energy and loses heat quickly.