Top-rated welders.

Get matched with top welders in Azusa, CA

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Azusa, CA?

Select your specific project to find the pro for you.

Find Welders in Azusa

Avatar for Alex Ortega Welding Fabrication Services
Alex Ortega Welding Fabrication Services
4.4(
10
)

Serving Azusa, CA and surrounding areas

Approved

In business since 2016

Free estimates

Credit card accepted

"• The coupler on the trailer was bent. • The trailer itself was in good condition. • The owner called Alex Ortega for assistance. • Alex reviewed the situation and I purchased a new coupler from Harbor Freight. • Alex spent six hours welding the new coupler onto the trailer. • The job was done very well, and the owner was very pleased. • The owner recommends Alex Ortega for any welding jobs. • The owner uses the trailer to transport their trike and move items from stores. • The owner notes that paying for delivery from stores can add up, making a trailer a worthwhile investment."
Solar Panels cleaning
Solar Panels Project
Solar Panels Project
Solar Panels Project
Welding Project

+32

Response time2 days
Response rate99%
Recommended by50%of homeowners
Avatar for Twin Ridge Metal
Twin Ridge Metal
5.0(
5
)

Serving Azusa, CA and surrounding areas

Approved

In business since 2020

Free estimates

Emergency services offered

"Max and his team at Twin Peaks Metal did a fantastic job from measurements to completion in 2 weeks for a custom gate and 80 feet of wrought iron fencing. The workmanship is beyond great with excellent welds to top notch installation with powder coating. Maxâ s prices were also very competitive and I will certainly use him again if I need any additional metal or fencing work in the future. Thanks Max, Devin, and Garret for a job well done! ð ð »"
Home owners
Modern Driveway Gates
Home owners
Trellis
Home owners

+13

Response time8 hrs
9 neighbors recently requested a quote
Recommended by80%of homeowners
Avatar for Mello Welding
Mello Welding
5.0(
4
)

Serving Azusa, CA and surrounding areas

In business since 2015

Free estimates

Credit card accepted

"Mello Welding is terrific. I received a call back and a quick estimate. The work to cut out a rusty section of railing and weld a new section in place was professionally completed on time. I really appreciated how quickly they responded. Very satisfied."
MALIBU
MALIBU
MALIBU
MALIBU
MALIBU

+15

Response time2 days
Recommended by100%of homeowners
Avatar for Palm Steel Welding
Palm Steel Welding
5.0(
2
)

Serving Azusa, CA and surrounding areas

In business since 2024

Free estimates

Emergency services offered

"Hiring Palm steel welding was a great experience.The environment was professional, and Walter's expertise made it easy to get what i was looking for. I was very happy with his attention to detail.His commitment to quality work is evident. I will keep Palm steel welding in mind for future welding services reviewed by Marilyn"
Response time30 mins
Avatar for Azteca 111 Builders Inc
Azteca 111 Builders Inc
4.3(
99
)

Serving Azusa, CA and surrounding areas

In business since 2006

"Azteca provided a thorough proposal that we found very helpful.  We were actually disappointed that we weren't able to work with them. They also provided great assistance in helping us analyze the bids prepared by other contractors and generally, great input on the design and layout of the project.  They were also extremely punctual and flexible. 
"
Kristan Cunningham Design - Pacific Design Center, West Hollywood
Kristan Cunningham Design - Pacific Design Center, West Hollywood
Kristan Cunningham Design - Pacific Design Center, West Hollywood
Additional Photos
Additional Photos

+5

Recommended by98%of homeowners
Avatar for One Water Systems
One Water Systems
4.7(
49
)

Serving Azusa, CA and surrounding areas

In business since 2006

Free estimates

Emergency services offered

"they are located near the coast so they are unfamiliar with where Lowes is. With that said, installation went well. I pushed to get new copper piping as we were taking out my old unit. I didn't argue the price asked, but I expect superior installation and superior service. I also have an undersink unit where the owner says to take out and plumber says its up to me. So I left it. Hmmmm. Hope I made the right decision. They would have had to go to plumbing store to do it perfectly for me. They are all very nice, hardworking. Most importantly I already had a back flush unit I was taking out due to age, and this unit is a really nice one. I'd do it again. Really nice water in the whole house including spigots on the house. But does not include irrigation system. This is the water I wanted and my hair my skin and my dishes are all perfect now. 10 year warranty, no maintenance and a yearly checkup included.
"
April 2013 Install
April 2013 Install
Valley Center Install
Additional Photos
Additional Photos

+11

Recommended by89%of homeowners
...
Showing 1-10 of 58
Welding questions, answered by experts

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

While a high-speed circular saw will cut through metal, and even cut through multiple sheets at once, the fast-spinning saw blades create a lot of heat. This heat can damage paint and other protective coatings, leading to serious problems like rust over time. The cost to paint a metal roof again to avoid this damage is typically an additional $0.50 to $1 per square foot.

To maintain custom or fabricated metal structures and extend their lifespan and appearance, perform regular cleaning, apply rust prevention treatments, and use protective coatings.

Welders use a variety of methods in their trade. Different types of welding are better suited for different purposes and contexts. For example, stick welding is a versatile form suitable for most metals and alloys. The most common types of welding include:

  • Stick welding: $100–$1,000

  • Metal Inert Gas (MIG) welding: $250 and up

  • Tungsten Inert Gas (TIG) welding: $250 and up

  • Gas welding: $150 and up

  • Forge welding: $15–$25 per hour

The Azusa, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"