Get matched with top roofers in Agua Dulce, CA

Though cedar shakes often get confused with shingles, there are a few key differences between wood shakes and wood shingles. For one, cedar shingle prices are lower, although shingles are less durable than wood shakes. Cedar shakes are thicker than shingles (shingles range from about 3/8 to 1/2 inches thick, compared to 1/2 to 3/4 inches thick for shakes). Wood shakes are handmade, while shingles are usually machine-made. Also, wood shakes work better on steeper roofs than shingles do. While the cost of cedar shingles is more budget-friendly, there are many great reasons to choose shakes.

Roof vents are an essential part of a roof, as they promote energy efficiency by keeping warm, humid air at bay. The roofing material, especially asphalt shingles, will not last as long as it should (about half of its manufacture life) if the attic is not ventilated. Also, going without ventilation means having a warm attic that demands more from your air conditioning system (and your wallet, once the bills come). Ridge vents and roof vents also prevent a host of other icky moisture-related problems like rot, mold, and mildew.

Depending on the condition of your roof, you may be able to add flashing to it. If you’re looking for a way to maintain its integrity while saving some money, you should ask a roofing pro if this is an option. Keep in mind that if your roof is in poor shape, a full replacement may be necessary before flashing is installed.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.