Get matched with top masons in Peridot, AZ

Q: Can You Limewash Surfaces Other Than Brick?

• <div><p>Yes, you can limewash surfaces other than brick. Plaster, stone, stucco, and concrete can all also be limewashed. Any porous surface that will absorb the wash is a good candidate for limewash, although it won&rsquo;t help much with waterproofing. If you choose to limewash over paint, you&rsquo;ll need to prep before applying it to avoid a powdery, chalky finish. Shiny surfaces like metal or glass can&rsquo;t absorb limewash, so it&rsquo;s not suited for these.</p></div>

Q: How long do brick houses last?

• <div><p><b>Brick houses can last at least 100 years</b> with minimal maintenance. With regular care and attention, including mortar repointing, brick houses can last 500 years or more.</p></div>

Q: Why did we stop using cobblestone?

• <div><p>Cobblestone fell out of favor with the advent of motor vehicles. Asphalt and concrete are both much smoother surfaces allowing for a smoother ride. Asphalt is also much cheaper, <a href="https://www.angi.com/articles/how-much-does-it-cost-install-asphalt-driveway.htm">especially for driveways</a>. However, we didn&rsquo;t stop using cobblestone altogether, and you can still see it as a decorative option in both homes, in parks, and in pedestrianized areas of cities. </p></div>

Q: Why can’t I drill into the brick?

• <div><p>Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.</p></div>

Q: What type of drill is best for brick?

• <div><p>The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you&rsquo;re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Peridot, AZ?

Select your specific project to find the pro for you.

Find Masons in Peridot

Arizona Foundation Solutions, LLC

4.1(

)

Serving Peridot, AZ and surrounding areas

Approved

In business since 2000

Free estimates

Warranties offered

"The crew did a great job and worked quickly. We'll see how it holds up, its only been a few weeks."

+24

Response time2 days

35 neighbors recently requested a quote

Recommended by79%of homeowners

Serving Peridot, AZ and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

"Manny and his crew did an amazing job with our barbeque concrete slab. They were professional, came out the day after I called, competitively priced and the work was clean and looks great! Will use again."

+14

Response rate100%

3 neighbors recently requested a quote

Recommended by77%of homeowners

Serving Peridot, AZ and surrounding areas

In business since 2024

Free estimates

Emergency services offered

"Jesus was very professional immediately answered my questions about a quote, day we scheduled for quote services he arrived on time and ensured all questions on pricing i had were answered.he guided me step by step on exactly what was going to be done and how the process would work . He placed a date on when project would begin and when it would be accomplished. He cleaned all trash and ensured housekeeping was done after project. Honestly if i could give Jesus 10 stars i would."

+97

Recommended by93%of homeowners

Request Quote

Property Rock Resources

5.0(

)

Serving Peridot, AZ and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"Louis was awesome and very accomodating"

+46

Recommended by100%of homeowners

Serving Peridot, AZ and surrounding areas

In business since 2014

Free estimates

Emergency services offered

"The worker was polite and very professional. Respected the property. The work done was great and looks wonderful. I highly recommend this company and I will definitely hire them. In fact this is the second time using them."

Recommended by98%of homeowners

Request Quote

Committed Construction, LLC

4.2(

)

Serving Peridot, AZ and surrounding areas

In business since 2006

Free estimates

"Because of the freeze, they covered the new foundation with insulation blankets. I had to leave town- so I don't know what they look like now or if blankets have been removed. But I expect it to look fine"

+15

Response time2 days

Recommended by100%of homeowners

Request Quote

BlueArc Fabrication llc

5.0(

)

Serving Peridot, AZ and surrounding areas

"On time, affordable, communicated everything and did an amazing job. Safety was definitely a priority to this company!"

Serving Peridot, AZ and surrounding areas

In business since 2015

Free estimates

Credit card accepted

"Rodrigo and his co-workers showed up on time did the job very professionally I had a patio of pavers done for my backyard and they finished on time I would highly recommend them to anyone and will call again"

+22

Recommended by100%of homeowners

Request Quote

National Property Inspections

4.7(

)

Serving Peridot, AZ and surrounding areas

In business since 2006

Free estimates

Emergency services offered

"Prompt courteous service. Explained important points during the inspection and provided a report that evening.
"

Recommended by85%of homeowners

Request Quote

AZ Fab and Restoration

4.5(

)

Serving Peridot, AZ and surrounding areas

In business since 2021

Free estimates

Credit card accepted

"It went exactly as planned. Adan Montoya was very communicative, helpful and patient throughout the project. He is friendly, fair, conscientious and hard working."

+10

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 19

Masonry questions, answered by experts

Yes, you can limewash surfaces other than brick. Plaster, stone, stucco, and concrete can all also be limewashed. Any porous surface that will absorb the wash is a good candidate for limewash, although it won’t help much with waterproofing. If you choose to limewash over paint, you’ll need to prep before applying it to avoid a powdery, chalky finish. Shiny surfaces like metal or glass can’t absorb limewash, so it’s not suited for these.

Brick houses can last at least 100 years with minimal maintenance. With regular care and attention, including mortar repointing, brick houses can last 500 years or more.

Cobblestone fell out of favor with the advent of motor vehicles. Asphalt and concrete are both much smoother surfaces allowing for a smoother ride. Asphalt is also much cheaper, especially for driveways. However, we didn’t stop using cobblestone altogether, and you can still see it as a decorative option in both homes, in parks, and in pedestrianized areas of cities.

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you’re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.

The Peridot, AZ homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Timothy Moore
•
Jul 10, 2026Jul 10, 2026
How Much Does Door or Window Lintel Replacement Cost? [2026 Data]
Door or window lintel replacement costs $400 on average, but there are ways you can save. On the other hand, complicated work will increase costs considerably.
Deane Biermeier
•
May 30, 2026May 30, 2026
How Much Does Brick Wall Repair Cost? [2026 Data]
This guide features information on the costs to repair a brick wall, whether or not you need a brick mason to complete spalling, tuckpointing, or a full restoration.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Repointing Brick Cost? [2026 Data]
Need to repoint brick in your home to make your home look fresh and new? Use this guide to repointing brick cost to price out your project before starting.
Xiao Faria daCunha
•
Jul 8, 2026Jul 8, 2026
What Is Masonry? Definition, Contractor Credentials, and More
If you're considering building a home with brick or stone, you need to know what is masonry? Learn the answer to ensure the finest quality.
Heather Ayer
•
Jul 9, 2026Jul 9, 2026
Your Guide to Common Masonry Materials
Discover the wide variety of masonry materials for your next home upgrade project. Our guide covers the different types of materials to choose from and more.
Dan Simms
•
Jul 9, 2026Jul 9, 2026
Masonry vs. Concrete: What’s the Difference?
When it comes to masonry versus concrete, it can be easy to confuse the two. Use this guide to learn about the differences in appearance, strength, and more.