Get matched with top countertop and backsplash pros in Warren, AR

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.

You can make laminate counters look like marble by following the steps above. However, the condition of the laminate may limit the final results. For example, if the laminate is splitting at the corners or has sharp edges, the epoxy may not work or mimic natural marble as well.

Tile countertops can last up to 100 years when properly maintained. Ceramic and porcelain tiles are the most durable types and can last as long as natural stone countertops like granite, marble, and quartz. Tile countertops are much cheaper than natural stone countertops, making them an excellent option for a homeowner with a limited budget.

Epoxy is typically more affordable than granite, especially if you’re choosing a high-end slab. Most granite countertops cost $75 to $145 per square foot to install, with high-end varieties topping $185 per square foot. 

In contrast, epoxy countertops cost $50 to $150 per square foot to install. The material costs for epoxy are significantly lower than granite, but installation costs can be higher. Rather than simply cutting granite countertops to size before installation, your contractor will need to carefully pour the epoxy over an existing surface.