Get matched with top countertop and backsplash pros in Bearden, AR

The cost of granite countertops is around $3,250 for most homeowners, but you could pay as low as $500 or over $4,000, depending on the size of your project and some other factors. In addition to the square feet of granite you need, your pricing will also depend on the following:

• Granite thickness 

• Quality and rarity of the granite, labeled in levels from one to five

• Granite color and texture 

• Countertop design

The frequency for sealing marble countertops depends on several factors, including the quality and color of the stone, the type of sealant used, and the amount of traffic the surface receives. Marble has a porous surface that requires sealing to maintain its shine and resist scratches. As a general rule, you should seal countertops at least once a year. However, for heavily used surfaces, like those in a busy kitchen or family bathroom, you may need to reseal them every three to six months. Conversely, countertops in a rarely used guest bathroom might only need resealing every few years.

The standard kitchen counter size is typically between 24 to 25 inches wide and 25 to 26 inches deep. Wider countertops are also common, with widths of 30 to 36 inches among the most popular choices. Note that these are just general guidelines, and there is flexibility to custom the size of countertops to suit individual needs and the space.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.