Get matched with top countertop and backsplash pros in Salem, AR

The best way to save money on countertop installation is to choose an affordable material. For example, if you have a busy kitchen and need durability, choose a more affordable but lasting material like granite countertops. Likewise, if you don't use your countertops often, you can use a softer material that costs less than more sturdy ones. 

Another way to cut costs is to remove and dispose of the existing countertops yourself, if possible. That way, countertop installers can get straight to placing the new feature, reducing labor costs.

Original Gorilla Glue is not a good choice for laminate countertops. It is not a contact cement, which is the best choice for this material, and it does not explicitly state that it should be used on laminate. Perhaps the best reason to avoid using Gorilla Glue on laminate is that it expands three times its original size, which could lead to your laminate being pushed away from the countertops.

You don’t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You’ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look—in which case, you may want to use a cutting board.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.