Get matched with top countertop and backsplash pros in Midway, AR

You attach solid surface counters with construction adhesive. Once your slab is ready, you fit it to the wall, apply the adhesive, and secure it in place with clamps until the glue dries. This usually takes several days. 

Afterward, you install the backsplash, faucets, and more. At this point, you can caulk the counter, allow it to dry for 24 hours, and then you're done with the installation.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The lifespan of painted countertops depends on the products used and how well they are maintained. Generally, they can last for a couple of years before needing a fresh coat. To maximize their longevity, it is vital to apply a durable sealer, such as a resin or water-based acrylic topcoat, over the paint. After applying the sealer, allow it to cure for the full recommended time, which can range from seven to ten days, to ensure a fully protected surface.

Yes, you can put hot pans directly on Dekton without causing any damage. Dekton countertops are extremely dense, which makes them highly resistant to heat. This density also makes Dekton nonporous and water-resistant.