Get matched with top door pros in Hermitage, AR

There are certainly perks to hiring a general contractor, but we recommend a closet professional. The reason is that their pricing may make more sense for your project. General contractors tend to search out bigger projects, and because of this, will attach a premium to smaller amounts of work. A closet pro may also have access to a wider range of materials than general contractors (and may be able to negotiate better discounts). 

A door swells up when there’s a lot of moisture in the air. Wood doors are porous, and the elements can cause them to expand with humidity and contract with dry air. Prevent swelling by coating the door in weather-resistant paint, which creates a barrier to seal out moisture. Otherwise, go with a water-repellent finish after the fact. On the plus side, this problem will go away once the weather changes.

The width of your door jamb should match your wall thickness exactly, so it depends on your wall. For standard door openings, the width is equal to the width of a 2-by-4-inch  stud, plus the width of the drywall on both sides—about 1/2 inch each—which comes out to 4 9/16 inches. Block walls and framed walls that use 2-by-6-inch framing require a door jamb that’s 6 9/16 inches. You should always measure your finished wall thickness to get an accurate width for your door jamb material.

Start by checking the top or side edge of the door. Look for a certification label or metal tag stamped with details like the fire rating and information on the manufacturer. Even if it’s painted over, the tag should still be visible. Next, look along the edges for slim intumescent strips. They’re designed to swell up and seal gaps when exposed to heat. Finally, check if the door closes itself. Most fire doors have a self-closing mechanism, like an overhead closer or spring hinges. If none of these are obvious, contact a fire safety professional to help verify your door.