Get matched with top masons in Caraway, AR

It is possible, albeit a lot slower, to break up a rock using water. You would do this by freezing and thawing the water. You could create some initial holes or cracks in the rock, then pour water into the cracks or holes and allow them to freeze (so it's best to do this in winter or in colder climates). Since water expands when it freezes, this puts pressure on the inside of the rock and causes it to crack. You could continue to pour more water in and let it freeze to continue to break up the rock.

For most brick cleaning jobs, including fireplace bricks, use a masonry sponge and a gentle cleaner. A simple solution of equal parts water and vinegar, or a few drops of dish soap in a bowl of water, can effectively remove grime. For tougher stains, you can use a dedicated masonry or fireplace cleaner. It is crucial to wet the bricks thoroughly with water before applying any cleaning solution to prevent the brick from absorbing it, and to rinse the surface completely afterward. Harsher cleaners containing bleach or ammonia should only be used as a last resort, and they should never be mixed together.

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

Yes, it is normal to see some minor hairline cracks in brick or mortar over time, often due to natural foundation settling. However, not all cracks are harmless. You should be concerned and contact a masonry professional for an inspection if you notice cracks that are getting wider or longer, or if new ones keep appearing. Other serious warning signs that can indicate significant structural or foundation damage include large vertical cracks (especially those that widen as they go up), stair-step cracks, L-shaped cracks, and deep horizontal cracks. Factors like temperature changes, moisture, and structural loading can also cause cracks to form or worsen.