Get matched with top countertop and backsplash pros in Austin, AR

Several countertop materials are designed to require as little maintenance as possible. The most popular options for ease of use include laminate, stainless steel, and quartz. These options are nonporous, so they’re unlikely to stain or be affected by mold and bacteria. They’re also easy to wipe down and safe to use with various cleaning products.

You can put hot pans on porcelain countertops. Porcelain is highly resistant to heat—it’s manufactured at around 2,500 degrees Fahrenheit, so it can withstand a ton of heat without cracking or damaging. Even though the high heat is a plus, you should still be cautious when putting hot surfaces on porcelain countertops.

Terrazzo is considered an eco-friendly and sustainable material because it is often made from recycled materials, such as chips of glass, marble, or polished metal, which helps reduce waste. While the epoxy resin used as a binder has its own environmental impact, it requires relatively low energy for production and does not release volatile organic compounds (VOCs) once fully cured, which helps lower the overall carbon footprint.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.