Get matched with top deck repair pros in Thomasville, AL

Yes, but it works best with lightweight snowblowers, the single-stage models or electric versions. Also, you need to have a rubberized intake edge on the ground and preferably rubberized auger paddles, not a metal version. Otherwise you may chip or damage the surface as you work. When it doubt, let the snow lie.

You can also use a snow blower on leveled gravel, but only if you carefully adjust the intake height so it doesn’t kick up the gravel and turn it into flying missiles.

The main cause of a rotting porch post is prolonged exposure to moisture. So, the best way to prevent rot is to eliminate and guard against moisture.

• Use wood caulk to seal any cracks, openings, or areas along the post where water is likely to pool.

• Secure porch posts into concrete, if possible.

• Cover wooden posts with protective sleeves or wraps, often made of vinyl.

• Install metal post anchors for extra support.

If you used regular jointing sand, you can typically walk on the repaired area right away. If you used polymeric sand, wait at least 24 hours before walking on it and 48 to 72 hours before driving over it, depending on the weather. Polymeric sand needs time to fully cure and lock the pavers in place.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.