Top-rated sandblasting pros.

Get matched with top sandblasting pros in Pelham, AL

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Pelham, AL?

Select your specific project to find the pro for you.

TRUSTED BY PELHAM, AL HOMEOWNERS

  • Average homeowner rating star icon4.7
    Average homeowner rating
  • Verified reviews icon875
    Verified sandblasting services reviews

Find Sandblasting pros in Pelham

Avatar for Evans Painting
Evans Painting
4.6(
61
)
Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Pelham, AL and surrounding areas

In business since 1938

Free estimates

Emergency services offered

"Tim Evans and family were all very friendly and easy to work with. Contracted with Tim to begin work on May 6. They came out to pressure wash and prep. Painting began on May 8 and they finished May 11. Noticed some areas of concern and they returned to retouching with no issues. A good group of folks and the house looks great!!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+3

Recommended by92%of homeowners
...
Showing 1-10 of 74
Sandblasting Services questions, answered by experts

Yes, many professionals use dustless or water-based blasting methods for reduced environmental impact.

Sand is a common sublayer for hardscape features like driveways, paver patios, and more. Most projects that involve sand require a 1-inch layer to promote evenness, drainage, and weight distribution. For further drainage, most projects have a 6-inch minimum layer of gravel beneath the sand. 

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.

Sanding and pressure washing serve different purposes in deck maintenance, so one is not necessarily better than the other. Pressure washing is ideal for annual cleaning to remove dirt, grime, mold, and mildew. Sanding is a deeper restoration method used to smooth rough surfaces, remove an old finish, and prepare the wood for a new coat of stain or paint. The ideal process for refinishing a deck is to first clean it (with a power washer), then sand it, and finally apply the new stain or finish. While cleaning should be done annually, sanding and staining are typically needed only every one to three years.

There are two ways sandblasting could be dangerous: improper use of the equipment so that the stream touches your skin, and air particles created during the sandblasting process. While the first is easier to avoid and fairly obvious, the second has the potential to be more serious and is much more difficult to understand. This is why you should always hire a pro to sandblast, as they understand the dangers associated with the process. If proper safety measures are taken, then sandblasting is rarely dangerous.

The Pelham, AL homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.