Get matched with top fencing pros in Dillingham, AK

The depth of your post hole depends on your post length. If you decide on a two-rail fence, the posts are likely 6 feet long. You want your hole to be at least 1/3 of the post length. In this case, your post hole should be two feet deep.

If you opt for a three-rail fence, the posts will typically be 7 feet long, meaning your post hole should be 28 inches deep.

On most untreated wood fences, there is no need to sand before treating. You typically only need to sand if there’s an old coat of paint or stain on your fence. If you do need to sand off a previous paint or protective coating (like an old stain or sealant), use medium-grit sandpaper.

Yes, like other types of wood fencing, pressure-treated fence boards can warp. However, there are a few things you can do to reduce the likelihood of your fence warping. Sealing or staining your fence every few years, for example, can protect the wood against moisture, sun exposure, and temperature changes.

The depth of the fence posts depends on the height of your fence. If you’re installing a 6-foot fence, then digging 2-foot-deep holes for the fence posts will help ensure a secure installation. However, if you’re installing an 8-foot fence, the posts will need to be deeper than 2 feet to support the structure properly. Also, consider how far apart the fence posts should be to provide adequate support.