Get matched with top dishwasher installation pros in Craig, AK

Yes, a dishwasher needs an air gap to prevent backflow. Additionally, in many locations, air gaps or another measure to prevent backflow are required for building code compliance. There are alternatives to an air gap, like a Studor vent or a loop and trap design, but an air gap is the simplest and most popular solution.  

Several signs can tip you off to a clogged dishwasher drain. At first, you may notice that it’s taking longer than usual for the dishwasher to drain, or you may hear gurgling sounds during the draining part of the cycle. You might also notice water backing up into your sink or excess food at the bottom of the dishwasher after a load. The most obvious sign, though, is seeing standing water at the bottom of your dishwasher after the cycle has finished.

Installing a dishwasher should take one to four hours, depending on the complexity of the installation and whether you DIY or hire a pro. Even if you're particularly handy, installing a dishwasher on your own will likely take longer — at least two hours. On the other hand, a professional can likely install a dishwasher in about an hour. Installation time will take longer if you have to remove an existing dishwasher, reroute plumbing, or repair damaged flooring underneath the appliance.

Some signs that your dishwasher is going out include:

• The door no longer latches 

• Dishes are still dirty after a cycle 

• Dishes are cold after a cycle 

• Rust inside or outside the unit 

• Cracks inside the dishwasher tub

• Water collecting at the bottom or outside the unit

If your dishwasher is not energy-efficient or is older than 10 years, you should also consider replacing it. Repairing an older model may be more expensive than replacing it with something newer and more energy- or water-efficient.